Network storage Synology FS3017 performance reaches more than half a million IOPS

Synology has introduced its first network-attached storage, designed to operate exclusively with solid state drives. A device called the Synology FlashStation FS3017 got 24 bays for drives size 2.5 inch SAS or SATA and hot swapping support.

Drives can be combined into RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, and RAID F1. RAID mode F1 created based on RAID 5, especially for arrays of SSDS: in this mode, parity bits are written primarily for only one drive available. Thus it resource is consumed faster than the other drives, which eliminates the need to change all the drives at once. After replace the old SSD to the main load is transferred to another storage device.

The maximum storage capacity of the Synology FlashStation FS3017 can reach 90 TB, performance during operations random access for reading and writing exceed the 500,000 and 250,000 IOPS, respectively. The basis of the store were two six-core Intel Xeon E5-2620 v3, augmented RAM DDR4 ECC RDIMM staff capacity of 64 GB which can be extended up to 512 GB using 16 of the available slots. Two network 10GbE port aggregation support, and the PCIe 3.0 x16 and x8, you can install two additional adapter 10GbE, 25GbE, or 40GbE.

Four fans standard size 80 mm have a quiet and normal operation, has two power supply 800 watts each. The warranty on the NAS, Synology FlashStation FS3017 valid for five years.

Tags:
Synology

Comment

(Visited 40 times, 1 visits today)
No tags for this post.