Inno3D presented a few cards GeForce GTX 1060 with different coolers

Company Inno3D quite actively expanding the range of cards on GPU Nvidia GeForce GTX 1060, presenting several such models, including the flagship status received two copies. They have got different cooling system and belong to different families: enriched Edition Twin X3 and X2, and the first card will be available in versions with storage capacity of 3 or 6 GB.

Graphics card iChill GeForce GTX 1060 received a cooler with a common heat sink for the GPU video memory and a separate power system. Aluminum radiator 123 has edges and is divided into two sections, connected by five heat pipes of different cross sections (8 and 6 mm). The metal casing of the cooler can be removed without using a screwdriver, under it there are three fans with blades of a special shape that reduces noise. In idle, the fans stop completely, but the video card resembles a red backlit logo. On the back side of the printed circuit Board is protected by a plate.

Basic GPU frequency increased from 1507 to 1569 MHz, the maximum is 1784 MHz. The frequency of GDDR5 memory is also slightly increased, from 8 GHz to 8.2 GHz. Use a powerful cooler has its own nuances: the length of the card reached 302 mm, the product will require the space of two and a half slots. On the mounting bracket and you can see three DisplayPort 1.4, DVI-D and HDMI 2.0.

Card Inno3D GeForce GTX 1060 Twin X2 is much shorter, its length is 218 mm, for which we should thank the dual-fan cooler. In his designs used a simple aluminum heatsink, no heatpipes, but fans of Japanese bearings can have a longer service life. Frequency nominal: 1506 MHz and 8000 MHz for the GPU and RAM, respectively, while the graphics processor can increase the frequency up to 1708 MHz. RAM is 6 GB, the set of video outputs identical to the previous model.

Tags:
Inno3D

Comment

(Visited 51 times, 1 visits today)
No tags for this post.