Four graphics cards Inno3D GeForce GTX 1070 Ti are based on separate PCB’s, but they all reference
Company Inno3D has prepared four GeForce GTX 1070 Ti. This model GeForce GTX 1070 Ti Jet Ti X2 GTX 1070 GTX 1070 GTX Ti X3 and X4 1070 Ti. And again, we can see that none of the novelties have not received factory overclocking, despite a top of the cooling system.
All cards operate at frequencies 1607/1683 MHz for the core and 8000 MHz for the memory. Model 1070 Ti GTX Jet is almost similar to the reference adapter, and is equipped with a cooler of turbine type.
Other adapters got familiar on other models of the manufacturer cooler HerculeZ different modifications. The older cards such equipped WITH four fans and this is its only difference from the GTX 1070 Ti X3. You can also note that these adapters have got the reference PCB of GTX 1080 Ti and the GTX Ti X2 1070 — cost reference GTX 1070.
In addition, you need to consider that older adapters have a length of 302 mm and take two and a half expansion slots. The ports all have the same: DVI, HDMI and DisplayPort (x3). Recall, the GeForce GTX Ti received 1070 2432 cores CUDA, 256-bit memory bus and 8 GB of memory.
GeForce GT 1070