Doogee Y6 Max equipped with 3D stereoscopic display resolution 6.5 inch

It would seem, stereoscopically screens in smartphones all have long forgotten, but no, some company once a year take and let the smartphone display showing three-dimensional image. New Doogee, named Y6 3D Max, belongs to these models.

To display the stereoscopic image in the display Doogee Y6 Max 3D uses a parallax barrier, so need to use points there. The display is large for a smartphone — 6.5 inch, however, due to the relatively low resolution, Full HD, pixel density does not reach values of 350 ppi. Interestingly, Y6 Doogee Max 3D will accompany the version of the smartphone with the usual display — it’s called the Y6 Doogee Max and no longer has any differences from related models.

Doogee Y6 Max 3D is built on single-chip system Mediatek MT6750T. It’s not the most common SoC Mediatek, therefore, not superfluous to recall that its configuration is composed of an eight-core CPU ARM Cortex-A53 and GPU Mali-T860, MP2. Volumes of RAM and internal flash memory is 3, and 32 GB. The nonvolatile memory can be expanded with cards microSD up to 128 GB.

In the main camera smartphone uses a Samsung sensor S5K3L8 a resolution of 13 megapixels, the system of the phase focus and a lens with a maximum aperture of F/2,2, consisting of five elements. The front camera uses a sensor resolution of 5 MP and wide angle lens with a viewing angle of 83° and a maximum aperture of F/2,2.

In Y6 configuration, Doogee Max 3D two SIM card slot, fingerprint sensor, the usual set of wireless modules and sensors, complemented by LTE modem and a magnetic field sensor.

The smartphone runs on Android 6.0. Size and weight are of 171.3 x 89 x of 8.95 mm and 250 grams, battery capacity — 4300 mAh.

Source: The Gadgets Freak Gizmochina



(Visited 65 times, 1 visits today)
No tags for this post.