Antec P110 Luce — casing and a minimalist design 120 Euro

The company Antec has expanded the range of computer chassis P110 Luce. Novelty has a minimalist design, which… much in common with the performance of the buildings Fractal Design series Define. However, this does not prevent P110 Luce to be self-sufficient body, and of very high quality.

In Antec P110 Luce used ABS plastic, steel thickness 0.8 and 1 mm. the Front wall is made of anodized aluminum with a thickness of 0.8 mm, and the left side is almost entirely decorated tempered glass.

The product is characterized by the dimensions 489 x 230 x 518 mm designed to install motherboard sizes ATX, microATX and Mini-ITX motherboards, CPU coolers height up to 165 mm, and graphics cards up to 390 mm long and power supplies up to 200 mm.

Inside the Antec P110 Luce, you can install up to six drives size 3.5 inches and two sizes 2.5 inch and on the rear panel in addition to the eight standard horizontal slots for interface panels expansion cards there are two vertical which allows you to install 3D-card parallel to the motherboard.

Case default is equipped with two fans with a diameter of 120 mm: one mounted on the rear panel, the other on the front wall. This set can be supplemented with four fans: two in front and two more on the top wall. Supported and installation of radiators WCS: format 280 mm in the top of 360 mm front and 120 mm rear. In this case, the fans, of course, will have to be dismantled.

A standard set of connectors of the case are complemented with an HDMI port for the convenience of working with headsets virtual and mixed reality.

Source: Antec

Tags:
Antec

Comment

(Visited 19 times, 1 visits today)
No tags for this post.